SANITARY VALVES

Home > valves > Four Position Butterfly Valve

Four Position Butterfly Valve

PRODUCT SPECIFICATION

  • Alloy: T316L
  • Sizes: 1.00″ – 6.00″ OD
  • Seats: EPDM (standard), Silicone, Viton®
  • Finish: Polish ID/OD
  • (4) Positions for Throttling the Valve
  • (ABS) Black Ball/ 100% Hydraulic Pressure Tested

PRODUCT CATALOG

Click on the image below to access information about this product in our catalog.

PRODUCT DESCRIPTION

Sanitary Solutions introduces the following: Sanitary Four Position Butterfly Valve to service the Bakery, Beverage, Cosmetic, Dairy, Food and Pharmaceutical Industries.

As you examine this valve with the pictures provided, look at the following features:

Our sizes ( 1" - 6" ) valve is designed with (4) four positions so you can slowly open the valve and create less stress on the valve seat versus the open and close style of valve. Upon opening the valve, you have the option of two other positions for more or less flow depending on your needs. Since the butterfly valve comes standard with a clamp end, it is easy to assemble and disassemble when cleaning or working in a tight space.

We have provide a Black Ball attached to the pull handle and interchangeability of the Handle to either side when placed in an area where a wall could be a problem and you can not open and close the valve.

Sanitary Solutions T316L Sanitary Clamp Four Position Butterfly Valve is 100 percent Hydraulic Pressure Tested and 100 percent inspected, no special tools needed in the field to work on the valve, Silicone seats are standard. Check out the line space of each size of the valve and you will see that it matches with a few of the major competitors.

As for the finish and all wetted surface, the sanitary finish is to a 25 Ra or better. We have each valve capped and bagged so you have no dings on the ends as well as permanently etching the size, alloy and heat number for full trace ability.

Click here for the Material Test Reports page and put in your heat number to receive a PDF copy of your report - now that's simple!

Upon downloading the PDF Valve Sheets on pages 28, 29, 30 in our "NEW Sanitary Solutions Valves/Product Recovery System Catalog", take a moment and review the break torque, flow coefficient, pressure rating and weight of each valve.

Please keep in mind that the operating temperature range is 15 degrees F to 195 degrees F to assist you as to your process line requirements.

Remember: We STOCK Repair Seats for these valves including Silicone, EPDM and Viton.

Sanitary Solutions ships the same day the order is placed with written confirmation for any type of seat needed for your valve. Call our sales team at 1-888-909-3569 or 1-855-640-7871 to assist you with stock availability, valve questions and repair kits.