Home > fittings > Sanitary Q-Line Fittings

Sanitary Q-Line Fittings


  • Alloy: T304 or T316L
  • Sizes: 1″ OD – 6″ OD
  • Finish: Polish ID/OD


Click on the image below to access information about this product in our catalog.


Sanitary Solutions is your source for T304 or T316L Sanitary Q-Line Fittings found primarily in Bakery, Beverage, Cosmetic, Dairy, and Food Industries. Our fittings meet or exceed 3-A standards with an ID polish of 180 Grit or 25 Ra on the Inside of the Tube and a 150 Grit or 32 Ra on the Outside of the tube. Sanitary Solutions bags each Q-Line fitting and has each product marked with the size and alloy and a heat number for full trace ability for either alloy. We have "beefed up" our clamps by adding more weight to the clamp to make it meets your needs and satisfy heavy pump vibration.

The 304 I-Line Wing Nut or Bolt Style of Clamp to form the union can be used for either the I-Line Fitting or Q-Line Fitting, but this is the ONLY Fitting that is interchangeable. Either type of clamp assembly with either the I-Line or Q-Line fittings permit easy assembly and safe fast cleaning of lines. All welds used in manufacturing are of Tungsten Inert Gas Method for true fusion of wall with no pitting or thinning. Weld end style of fittings are made to exact circularity tolerances and have true square butt ends for on site Tungsten Inert Gas Installation.

When placing an order that day, our sales staff will send you an e-mail confirmation and tracking information showing that the product shipped the day of the order and that the product shipped complete. Take a few moments to browse the "NEW 2015 SANITARY SOLUTIONS PDF Q-Line Fittings Catalog" that we stock from 1" - 4" or can have made to fill your requirements and upon review, we think you will agree that the dimensions shown in this PDF are to standards accepted by the industry. Sanitary Solutions is your source when your end user is experiencing high pressures, vibration or high temperatures in the line and extra strength is needed. Q-Line fittings interlock, enclose the gasket, and create a metal to metal design to control gasket extrusion and the above problems in the line.

Click here for the Material Test Reports page and put in your heat number to receive a PDF copy of your report - now that's simple!

If you are looking for a robust, thick, heavy, metal-to-metal design fitting to use in those harsh or rough environments, hard to clean areas, or where pump vibration is excessive then call 1-888-909-3569 or 1-855-640-7871 for our full line of Sanitary Q-Line Products and ask for the "NEW SANITARY SOLUTIONS 2015 CATALOG."

Click here for 3-A Certifications